Kaishan KRSL Series Low Pressure Rotary Screw Air Compressor

Factory startup included, direct drive, fixed speed compressor, low pressure 25 to 45 PSI and flow rates from 275 to 2020 CFM at 36 PSI.

Kaishan KRSL Series Low Pressure Rotary Screw Air Compressor
Kaishan KRSL Series Low Pressure Rotary Screw Air Compressor - Internal Components

View Company Reviews

Highlights...

Features

Flow rates at 36 PSI:
- 30 HP (KRSL-30): 275 CFM
- 60 HP (KRSL-60): 515 CFM
- 100 HP (KRSL-100): 1010 CFM
- 200 HP (KRSL-200): 2020 CFM
SKYv Series airend with SKF bearings
- Pressure Flexibility between 25 to 45 PSIG
TEFC (IP54) motor with IEC frame and Class F insulation
Integrated after cooler and cooling fans
316 stainless steel control tubing
3-stage tangential oil separation
Modulating inlet valve
MAM-200 digital control panel:
- Protects compressor in the event of a fault
- Provides service required alert
- Sequencing of up to 16 compressors
- External monitoring via RS 485 interface
- WYE Delta starter standard to reduce in-rush current
5 year airend warranty

The Kaishan KRSL Series low pressure rotary screw air compressor is a fully packaged unit that is ready to be plugged into any system or can operate independently. The KRSL Series comes equipped with Kaishan's patented SKYv airend, enabling the compressor to perform in a wide range of applications with varying demands. The variable discharge port achieves maximum efficiency by adjusting internal compression ratio, allowing the compressor to effectively handle applications ranging from 25 to 45 PSIG. This feature, combined with the SKF bearings, results in improved efficiency, consistent airflow, reduced noise levels, a smaller overall footprint, and a lower total cost of ownership throughout the lifespan of the compressor.

The KRSL Series features the MAM-200 digital control panel. This unit protects compressor in the event of a fault, provides service required alerts, allows for sequencing of up to 16 compressors, and provides external monitoring through the RS 485 interface. The KRSL also has increased cooling efficiency with an integrated after cooler and cooling fans that bring the approach temperature to 14°F (10°C). The 3-stage tangential oil separation is optimized for higher flow and lower pressure with minimal pressure drop and 3 PPM carryover.