FPZ

FPZ is known for being a manufacturer of high performance regenerative blowers that are used to move air in pressure or vacuum systems as well as a range or blowers suitable for handling gases such as methane or biogas.

FPO-engineer

Questions? Call one of our experts at 1-866-778-6572.

Sort and Filter FPZ

CATEGORY: Parts (); FPZ Parts (); Regenerative Blowers ()

IN STOCK: No ()

FPZ MS Series Regenerative Blower

FPZ MS Series Regenerative Blower

Single stage blower with TEFC cURus motor and high efficiency impeller, mountable in any position.

Starting at $812.00

FPZ Evolution Series Regenerative Blower

FPZ Evolution Series Regenerative Blower

5.5 to 30 HP single- or two-stage blower with 304 to 1492 CFM capacity.

Starting at $4,006.00

FPZ MD Series Regenerative Blower

FPZ MD Series Regenerative Blower

Single impeller two-stage blowers, 1.5 to 4 HP, for applications where higher pressures are required.

Starting at $1,683.00

FPZ 06 Series Regenerative Blower

FPZ 06 Series Regenerative Blower

Quiet operation blower with low weight cast aluminum construction and TEFC cURus motor.

Starting at $646.00

FPZ 10DL / 15DH Series Regenerative Blower

FPZ 10DL / 15DH Series Regenerative Blower

0.5 to 1 HP single stage blower requiring no lubrication or maintenance, mountable in any plane.

Starting at $1,128.40

Safety valve - 3" npt.

Safety valve - 2" npt.

Safety valve - 4" npt.

FPZ TS Series Regenerative Blower

FPZ TS Series Regenerative Blower

Twin impeller, single stage blower. Designed for high airflow applications, 290 to 1093 CFM, 5.5 to 25 HP.

Starting at $2,921.00

Swing check valve - F x F.

Silencer - Aluminum - Male x End mount - npt threads.

Inlet filter with weather hood.

Safety valve - high pressure - 2" npt.

Flexible connection.

Replacement cartridge filter for FL5 paper.

Replacement cartridge filter for FL6 paper.

Indoor intake filter.

Replacement filter element with prefilter.

Used on e09-11 MS + MD + TD.

Sleeve for flexible connection mounting - Aluminum.

Replacement cartridge filter for FL8 paper.

Replacement filter element with prefilter.

Replacement cartridge filter for FL9&10 paper.

Replacement cartridge filter for FL9&10 Polyester.

FPZ FS-235P-400

Polyester Inlet filter - used on K09-10 MS+TD; K09-12 MD.

Sound Enclosure for K05-6 MS / 30-40DH MOR.

Sound Enclosure for SCL R20-R30-R40-MD.

Pressure gauge - 0-15 psig - 2" dial 1/4" npt back mount.

Used on model(s) 15DH.

Inlet filter with weather hood.

Indoor intake filter.

Swing check valve - F x F.

Cyclone In-Line filter.

Pipe tee with (2) taps for gauges - GAS threads.

Cyclone In-Line filter.

Used on model(s) K09-12 TS.

Sound Enclosure for e / K 7-8 MS; k05-06 TS.

FPZ CTD-375P-500C

K11-TS, K12-TS.

Inlet Protector - stainless steel screen - nylon thread.

Sleeve for flexible connection mounting - Aluminum.

Silencer - Steel - Male x End mount - GAS threads.

Inlet filter with weather hood.

Replacement element for FC6 filter.

Replacement element for FC8 filter.

Vacuum Gauge - 0-200" H2O - 2" dial 1/4" back mount.

Used on model(s) K04-MS.

Used on model(s) K05-6MS.

Used on SCL R20-30 MD (MOR and STS).

Silencer - Steel - Male x End mount - GAS threads.

Inlet filter with weather hood.

4" npt 90 deg PVC inlet filter manifold.

Used on e09-11 MS+MD+TD GOR / GVR.

Inlet filter with weather hood.

Weather Enclosure for models SCL K06 and smaller.

Sleeve for flexible connection mounting - Aluminum.

Replacement filter element with prefilter.

Replacement filter element with prefilter.

400V-36 mfd capacitor for 2 hp IP 65 lafert WBR.

Indoor intake filter.

Silencer - Steel - Male x Male - GAS threads.

Replacement element for FV6 filter.

Flange Connector - allows direct connection of safety val.

Indoor intake filter.

Used on model(s) 10DL.

Filter manifold for FL6 (K series).

2" npt 90 deg PVC inlet filter manifold.

Flexible connection.

Flange Connector - allows direct connection of safety val.

Inlet filter with weather hood.

Replacement element for FV9 filter.

Pressure gauge - 0-200" H2O -2.5" dial 1/4" npt back mount.

Used on SCL 20DH (blower is out of production).

Used on model(s) 20DH-STS (blower is out of production.

Cyclone In-Line filter.

In-line filter (vacuum applications).

Swing check valve - F x F.

Used on model(s) K07R-8R-MD.

Sound Enclosure for K07-8 R MD.

Sound Enclosure for e / K09-10-11-12 MS/MD; e / K07-08.

Inlet Protector - stainless steel screen - nylon thread.

Rubber feet (larger size).

Female flange - used on FCD.

Female flange - used on: K 03 MS, SCL R20-R40.

Female flange - used on: OLD O6 and 15DH.

Replacement filter element.

Replacement filter element.

Inlet Protector - stainless steel screen - nylon thread.

Female flange - used on FCD.

Female flange - used on: K 04 MS; fits R series.

Female flange - used on all 2" blowers and FCD.

Sleeve for flexible connection mounting - Aluminum.

Inlet Protector - stainless steel screen - nylon thread.

Flexible connection.

Sleeve for flexible connection mounting - Aluminum.

Female flange - used on all 3" blowers and FCD.

Swing check valve - F x F.

Female flange - used on all 4" blowers.

Tube connector - allows direct connection of flexible hose.

Swing check valve - F x F.

Swing check valve - F x F.

Flexible connection.

Replacement cartridge filter for FL1 paper.

Replacement filter element.

Flexible connection.

Sleeve for flexible connection mounting - Aluminum.

Flange Connector - allows direct connection of safety val.

Replacement cartridge filter for FL2-3-4 paper.

Replacement element for FV5 filter.

400V -20 mfd capacitor for 0.75 hp Lafert 1 phase motor.

Silencer - Steel - Male x End mount - GAS threads.

Silencer - Steel - Male x End mount - GAS threads.

400V -31.5 mfd capacitor for 1 hp Lafert 1 phase motor.

400V-16 mfd capacitor for 1/3 + 1/2 hp Lafert 1 phase motors.

Swing check valve - F x F.

Flexible connection.

Silencer - Steel - Male x Male - GAS threads.

Flexible connection.

Silencer - Steel - Male x Male - GAS threads.

Tube connector - allows direct connection of flexible hose.

450v-40 mfd capacitor for 1 hp (New Lafert).

450v-45 mfd capacitor for 1.5 hp (New Lafert).

Sleeve for flexible connection mounting - Fe (cut nipple).

Replacement element for FV8 filter.

Swing check valve - F x F.

Replacement filter element.

Filter manifold for(K series).

Filter manifold for(K series and R series).

Indoor intake filter.

Filter manifold for FL5 (K series).

Replacement element for FC5 filter.

Used on model(s) O6.

400V -60 mfd capacitor for 3 hp Lafert 1 phase motor.

400V -70 mfd capacitor for 2 hp Lafert or 3 hp Bonora motor (70 mfd-450 v OK).

400V -50 mfd capacitor for 1.5 hp old Lafert+ 2 hp New lafert.

450V-55 mfd capacitor for 1.5 hp and 2 hp Bonora 1 phase motors.

1.5" npt 90 deg PVC inlet filter manifold.

Female flange - used on all 5" blowers.

Inlet filter with weather hood.

Filter manifold for FL6 (DH series).

FPZ PLX-0000247

galvanized piping assembly used to intall VRL6 + gauge.

Tube connector - allows direct connection of flexible hose.

Tube connector - allows direct connection of flexible hose.

90 degree manifold kit.

Tube connector - allows direct connection of flexible hose.

Flange Connector - allows direct connection of safety val.

Flange Connector - allows direct connection of safety val.

Flange Connector - allows direct connection of safety val.

Inlet filter with weather hood.

Flange Connector - allows direct connection of safety val.

FPZ PLX-0000251

galvanized piping assembly used to intall VRL6 + gauge.

FPZ PLX-0000238

galvanized piping assembly used to intall VRL6 + gauge.

Pressure gauge - 0-15 psig - 2" dial 1/4" npt back mount.

Flexible connection.

90 degree manifold kit.

Used on model(s) K03-MS.

Pressure gauge - 0-60" H2O -2.5" dial 1/4" npt back mount.

Vacuum Gauge - 0-60" H2O - 2" dial 1/4" back mount.

Vacuum Gauge - 0-300" H2O - 2" dial 1/4" back mount.

Pressure gauge - 0-300" H2O -2.5" dial 1/4" npt back mount.

Flexible connection.

90 degree manifold kit.

Replacement filter element.

Used on model(s) 20DH-R (out of production).

Inlet filter with weather hood.

Used on model(s) 30DH-R (out of production).

Safety valve (vacuum or pressure) 10DL, 15DH, 06.

Used on model(s) 30DH-STS (blower is out of production.

Replacement filter element with prefilter.

Replacement filter element with prefilter.

SCL 30DH (blower is out of production).

Used on model(s) K03-TS/TD.

Replacement element for FC9 filter.

Used on model(s) K04-TS/TD.

Indoor intake filter.

In-line filter (vacuum applications).

Replacement filter element with prefilter.

Filter manifold for FL8.

Safety valve - Vacuum only - 2".

90 degree manifold kit.

3" npt 90 deg PVC inlet filter manifold.

Replacement filter element with prefilter.

90 degree manifold kit.

Safety valve - high pressure - 3" npt.

Used on model(s) K05-6 TD.

Silencer - Steel - Male x Male - GAS threads.

Silencer - Aluminum 3" npt male x end mount.

Filter manifold for FL9.

Used on e07-08 TS GOR / GVR.

Used on e07-08 MD.

Silencer - Aluminum - Male x Male - NPT threads.

90 degree manifold kit.

Pipe tee with (2) taps for gauges - GAS threads.

Used on model(s) K05-6 TS.

safety valve - 2" npt anodized.

Used on e07-08 MS+TD.

Used on e07-08 MD GOR / GVR.

FPZ PLX-0000239

galvanized piping assembly used to intall VRL6 + gauge.

Used on model(s) K07-8-TD.

Used on e07-08 MS-TD GOR / GVR.

BPA Kit - Used on model K04-MS.

Used on model(s) k09-11 MS.

Sleeve for flexible connection mounting - Fe.

Safety valve = 3" npt - anodized.

Used on SCL 40DH (blower is out of production).

Used on model(s) K07-8-TS.

Used on e07-08 TS.

Used on model(s) 40DH-STS (blower is out of production.

In-line filter (vacuum applications).

Safety valve - 4" npt anodized.

FPZ FS-245P-400

Polyester Inlet filter - used on K07-8 TS; K11-12 MS+TD.

BPA Kit Used on model(s) K05-6 TD.

Used on model(s) 40DH-R (out of production).

BPA Used on model(s) K05-6MS.

Cast aluminum foot bracket for vertical mounting.

Cast aluminum foot bracket for vertical mounting.

SCL R40 MD (MOR and STS).

Pipe tee with (2) taps for gauges - GAS threads.

BPA kit -used on model(s) K07-8-MS.

Filter manifold for FL10.

BPA kit -used on model(s) K09-11.

FPZ PLX-0000250

galvanized piping assembly used to intall VRL6 + gauge.

FPZ KR0043 & KR0044

Used on model(s) 80SH & 80DH & 90SH & 90DH.

Used on 07-K08-TS - BPA.

Indoor intake filter - stainless steel screen.

Used on model 90DH-ST.

FPZ CV 5-502M-1330

Check valve - m x m.

Used on model(s) K07-8 MD.

Cyclone In-Line filter.

Used on model(s) K12-MS; K09-12 MD.

Used on model(s) K09-11TD.

Used on e09-11 TS gor / GVR.

Used on e09-11 TS.

Aluminum tube - Steel flange - Male x End mount - npt th.

FPZ CSL-2541-400I

K07-TS, K08-TS, K11-MS, K12-MS, K11-TD, K12-TD (includes (2) 1/4" taps).

Sound Enclosure for K03-MS-MOR.

Sound Enclosure for K04-MS-MOR.

FPZ VI6G50+0002

24 VDC Flow converting Device for SCL K05+ K06-MS.

FPZ VI6C50+0006

24 VDC Flow converting Device for SCL K04-MS.

FPZ CT-275P-500C*

K09-TS, K10-TS.

Base for SC9M-1, SC9M-2 & SC10M.

Weather Enclosure for models SCL K07 and larger.

Sound Enclosure for K05-6 TD.

Sound Enclosure for e / K07-8 TD.

Sound Enclosure for e / K 09-10-11-12 TD.

Sound Enclosure for e / K 09 -12 TS.

FPZ CSL inline filters utilize Polyester element. Prices are same for paper or wire mesh (no m

CSL inline filters utilize Polyester element. Prices are same for paper or wire mesh (no m.

Call for pricing

Recently Viewed

We’re open Mon - Fri, 8:00 am to 5:00 pm ET